SEALANTS AND ADHESIVES
MEMOCHEM CHEMICAL ANCHOR

The E product is a 2-component reaction resin mortar based on a epoxid acrylate resin and will be delivered in a 2-C cartridge (ST – standard cartridge) system. This product may be used in combination of a hand-, battery-, or pneumatic tool and a static mixer. It was designed as a cost-effective alternative for the anchoring of threaded rods and internal threaded rod sleeves for non-approved applications. By using a screen sleeve, an easy and save application in hollow bricks is guaranteed. The product is characterised by good applications with an ambiance temperature up to 80°C and by revised chemical resistance for applications in extreme ambiences e.g. in swimming pools (chlorine).

 

• Application in uncracked concrete, solid brick and hollow brick with comercial threaded rods
• overhead application
• Suitable for attachment points close to the edge, since anchoring is free of expansion forces
• revised chemical resistance
• low shrinkage
• high bending- and pressure strength
• Cartridge can be reused up to the end of the shelf life by replacing the static mixer or resealing cartridge with the screw cap
• Mechanical properties acc. to EN 196 Part1
+ Density: 1,68 kg/dm2
+ Compressive strength: 121 N/mm2
+ Bending strength: 59 N/mm2
+ Dynamic modulus of elasticity: 3500 N/mm2

APPLICATIONS SAMPLE

Roof

Wood construction

Metal Construction

Metal Profils

Console

Railing

Sanitary devives

Cable Trays

Piping

MEMOCHEM CHEMICAL ANCHOR
Contact
İSTANBUL Head Office
Fettah Başaran cad. No: 89 Orhanlı
Tuzla İSTANBUL
Contact information:
Tel : +90 (216) 466 49 49
Fax : +90 (216) 466 49 50
E-mail: info@yoldasgrup.com
İZMİR Plant
İTOB Osb. 10034 Sk. No:3
Menderes - İZMİR / TURKEY
Contact information:
Tel : +90 (232) 799 04 41
Fax : +90 (232) 799 04 42
E-mail: fabrika@yoldasgrup.com
@ Point Bilgi İşlem - www.pointbilgiislem.com